Shenzhen Guiyuan Industry Development Co., Ltd.
Main products:RF Wireless Remote Control Switch,Touch Wall Light Switch
Products
Contact Us
  • Contact Person : Ms. Pan Jane
  • Company Name : Shenzhen Guiyuan Industry Development Co., Ltd.
  • Tel : 86-0755-28125790
  • Fax : 86-0755-29192090
  • Address : Guangdong,Shenzhen,17B, Build 7, No.4, Jin Xiu Jiang Nan, Meilong Road, Longhua
  • Country/Region : China
  • Zip : 518109

Amplitude modulation OOK 4 Channels High Level Output Super Regeneration RF Wireless Receiver Module With Learning Code Decoder

Amplitude modulation OOK 4 Channels High Level Output Super Regeneration RF Wireless Receiver Module With Learning Code Decoder
Product Detailed
Modulation Method: Amplitude modulation (OOK) Working Voltage: DC 5V Receiver module with decoder widely used 4 channel

Feature:

Model No.: 0020316Type: Receiver module with decode for fixed codeModulation Method: Amplitude modulation (OOK)Working voltage: DC 5VWorking current: 4.5mARF Sensitivity: -95dBmCoding Method: Fixed code by learningDecoding Outputs: High levelWorking temperature: -20°C ~ +70°CSize: 37mm*35mm*12mmWith four decoding outputsControl Modes: We can offer Toggle, Momentary or Latched, you can choose one.Frequency: We can offer 315 MHz or 433.92 MHz, you can choose one.

LEARNING the remote control:

1) Press and hold any button of remote control, then press LEARNING button of the receiver.2) Release the button of the receiver, the LED light is off after it flashes three times, it means LEARNING is successful.3) The receiver can learn several remote controls of different codes.

DELETE the remote control:

Delete all stored codes of remote controls: Press the button of the receiver for about 3 seconds until the LED light flashes quickly, then release the button, the LED light will flash slowly, it means all stored codes have been deleted successfully. At this time, remote control can not control the receiver.

Setting different control modes:

1) Setting control mode Toggle: Connect Jumper-2.Control mode Toggle: Press -> On; Press again -> Off.2) Setting control mode Momentary: Connect Jumper-1.Control mode Momentary: Press and hold -> On; Release -> Off.3) Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Application:

The RF receiver modules are widely used for remote controls, remote control toys, anti-theft alarms, garage doors, roller shutter, road barrier, retractable doors and so on.

Amplitude modulation OOK 4 Channels High Level Output Super Regeneration RF Wireless Receiver Module With Learning Code Decoder



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.